快捷方式:发布信息| 收藏公司

血氧仪 脉搏血氧仪 CMS50DL Pulse Oxime

产品/服务:
有效期至: 长期有效
最后更新: 2017-08-22 19:11
单价:
面议
最小起订量:
1 件
立即询价

(发货期限:自买家付款之日起 天内发货)

诚信档案

  • 所在地区:河北
  •   
  • 收藏本公司 人气:692
    • 详细说明
    • 规格参数
    • 联系方式

    CMS50DL Pulse Oximete

    Instuctions

    Pinciple of the CMS50DL Pulse Oximete is as follows: Photoelectic Oxyhemoglobin Inspection Technology is adopted in accodance with Capacity Pulse Scanning & Recoding Technology,the Pulse Oximete can be used in measuing the pulse oxygen satuation and pulse ate though finge.The poduct is suitable fo being used in family, hospital, oxygen ba, community healthcae, physical cae in spots (It can be used befoe o afte doing spots, and it is not ecommended to use the device duing the pocess of having spot) and etc.

    Majo Featues

    1. Integated with SpO2pobe and pocessing display module
    2. Small in volume、light in weight and convenient in caying
    3. Opeation of the poduct is simple ,low powe consumption
    4. SpO2value display
    5. Pulse ate value display, ba gaph display
    6. Low-voltage indication: low-voltage indicato appeas befoe woking abnomally which is due to low-voltage
    7. Automatically powe off function: when the device is unde the state of measuing inteface . it will automatically powe off within 5 seconds if the finge falls out of pobe.
    8. Vaious colo of cove can be selected

    Main pefomance

    • Display Mode: LED display
    • SpO2Measuing Range: 0%~100%(the esolution is 1%)
    • Accuacy: 70%~100%: ±2% ,Below 70% unspecified.
    • PR Measuing Range: 30bpm~250bpm(the esolution is 1bpm)
    • Accuacy: ±2bpm o ±2% (select lage)
    • Measuement Pefomance in Weak Filling Condition:SpO2and pulse ate can be shown coectly when pulse-filling atio is 0.4%. SpO2eo is ±4%, pulse ate eo is ±2 bpm o ±2% (select lage).
    • Resistance to suounding light: The deviation between the value measued in the condition of man-made light o indoo natual light and that of dakoom is less than ±1%.
    • Powe Consumption:less than 25mA
    • Voltage: DC 2.6V~3.6V
    • Powe Supply:1.5V (AAA size) alkaline batteies × 2
    • Battey woking hou: The minimum continually wok time is 24 hous, theoetical numbe is 56 hous.
    • Safety Type:Inteio Battey, BF Type

    Accessoies

    • Sell in standada hanging opea use manual

    Physical Identity

    Dimension:57(L) × 31(W) × 32(H) mmWeight:about 50g (with the batteies)

    CE、FDA Passed

    CMS50DL 脉搏血氧仪

    产品简介

      CMS50DL型脉搏血氧仪采用光电血氧检测技术结合容积脉搏描记技术,能够通过手指检测到人的血氧饱和度和脉搏。此产品适用于家庭、医院、氧吧、社区医疗以及运动保健(可在运动前后使用,不建议运动过程中使用)等范围。

    要特点

    1. 集血氧探头和处理显示模块于一体
    2. 产品体积小、重量轻,携带方便
    3. 产品使用简单方便,功耗低
    4. 血氧饱和度数值显示
    5. 脉率数值、棒图显示
    6. 电池电压低指示:电池电压低至不能正常工作前,电池低电量指示标志出现
    7. 自动关机功能:在测量界面的状态下,被测手指脱开后5s内自动关机
    8. 多种颜色外壳可选

    产品性能

    • 显示模式:LED显示
    • 血氧饱和度测量范围:0%~100% (分辨率为1%)
    • 精度:70%~100%:±2% ,小于70%无定义
    • 脉率测量范围:30bpm~250bpm (分辨率为1bpm)
    • 精度:±2bpm或±2% 取大值
    • 弱灌注下的误差:在脉搏充盈度为0.4%时,血氧仪能正确显示血氧饱和度和脉率数值,血氧饱和度误差为±4%;脉率误差为±2bpm或±2%取大值。
    • 抗环境光干扰能力:在室内自然光及现有照明光源下的血氧测量值与暗室条件下的测量值相比,偏差小于±1%
    • 功耗:不大于25mA
    • 工作电压:DC 2.6V~3.6V
    • 电池:2节七号1.5V碱性电池
    • 电池工作时长:最低可持续工作24小时,理论值为56
    • 安全类型:内部电源设备,BF型应用部分

    附件

    • 标配:挂绳1根使用说明书1本

    物理特性

    尺寸:57(长) × 31(宽) × 32 (高) mm 重量:约 50g (含二节7号电池)

    您可以通过以下类目找到类似信息:

     

    免责声明:以上所展示的信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责。中国前沿科技网对此不承担任何责任。

    友情提醒:为规避购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量!